The Right Way To Paint Your Roof Tiles

Most homeowners choose the concrete tiles when it comes to selecting the roofing cover. Such tiles not only come in various designs and colors but also enhance the overall protective strength of your roof. The different manners in which these tiles can be installed, add a new dimension to the beauty of your home.

Like the other home components, these concrete tiles too are subjected to constant wear and tear. Owing to their direct contact with the external agents such as air, water, dust and sunlight, they start to lose their shine very early. Hence it requires a good coating of a carefully chosen paint to restore the beauty of your roof tiles.

Before you start applying primer and paint on the surface of these tiles, make sure that you have cleaned off the area well. Remove the debris and dust sticking to the surface of these tiles first. Use a brush with fine bristles and a hot water bucket to carry out the cleaning work. Add a calculated amount of detergent powder in the bucket and dissolve it well. Rinse the tiles thoroughly such that no residue is left on the concrete tiles.

Visit a local hardware store and demand a fixed amount of acrylic exterior paint and respective primer. The primer eases off the surface of the tiles and hence, it should entirely be acrylic. Ask the salesperson to suggest a pure acrylic paint which doesn’t contain any other component such as latex.

The amount of primer and paint to be purchased depends on the area of your roof. To determine the exact quantity of the paint supplies, make way for an expert roofer and let him suggest the approximate amount of primer and paint that would serve the required purpose. Since he possesses the required experience and expertise, he would always be very close to the exact figures.

Once all the supples and paints are at your disposal, climb up the roof and commence the project. Grab a large-sized brush and apply a thin coating of acrylic primer on each tile. Wait overnight to let the primer dry off.

Let the primer dry overnight. Once primed has dried completely, paint each tile of the roof with one coating of the acrylic exterior paint bought. Once the initial coating of the paint has dried off, apply another coating and let it dry overnight.

Seal the surface with the application of a sealer compound. This sealer prevents the paint from chipping and cracking.

Scott Rodgers is a fine expert who has been authoring on roofing for a long time now. His exemplary guidance has given motivation to a host of workers, ranging from Powder Springs Roofers to Lexington Roofers.